Can’t Decide On EquaFlex vs MORryde? [We Got You Covered!]

When you buy through links on our site, we may earn an affiliate commission, Read More.

Our RV is like a blessing in disguise in our family. Though it is brand new, we have to buy many accessories to make it future-proof. That’s when I decided to buy a suspension. I narrowed it down to the two of the best suspensions in the market currently Equaflex and MORryde

So, what is all the confusion between Equaflex Vs MORrydeAs it turns out, both feel almost perfect for my needs. Both the suspensions allow for a reasonable height raise and weight limit. Both of them offer a good travel experience. But the dilemma comes with the differences in the price range. 

Being a travel nomad, I had quite a difficult time choosing the winner. If you too are facing an issue such as me, this is the right article for you. Read along!

The Differences Between EquaFlex Vs MORryde

Differences Between EquaFlex and MORryde

If you like going on camping or trekking excursions, then you should already understand the significance of owning a motorhome or recreational vehicle. With RVs comes the need for suspensions such as equaflex and MORryde. To know more about them, read below:

FeaturesEqua flexMORryde
SuspensionGreatGreat
EqualizerRubber materialWet bolts for the shackles as material
OptionsDiverseDiverse
Shackel kitsYesYes
Shock absorptionGoodGreat
Country of OriginUSAUSA
Quantity In Package11
Sales Unit of MeasureEAN/A
Suspension travelN/A4
Suspension typeTriple axelAirless
Height3 1/45 1/2
Travel experienceSmoothSmooth
InstallationEasyMedium
WarrantyYesYes
ExpensiveNoYes

1. Suspension upgrade

Equaflex

Equaflex suspension reviews are off the charts! With these cushioned Equa-Flex equalizers, you can upgrade your trailer’s suspension for a smoother ride. The rubber cores of the Equa-Flex absorb the shock like a sponge.

MORryde

The MORryde suspension modification is quite practical. The rubber suspension systems have proved to be effective. The I.S. The suspension travel of the system is up to 2 1/2 times that of traditional leaf springs. This helps it to absorb more road shock.

Winner: Equaflex

Lippert Components Equa-Flex Rubberized Equalizer Triple Axle Kit for Double-Eye Leaf Springs and...
  • SMOOTHER RIDE - Dramatically reduces fore to aft trailer movement, otherwise known as chucking
  • ADDED PROTECTION - Helps eliminate trailer and cargo damage caused by road shock and vibration
  • EASY UPGRADE - Delivers a ride as smooth as torsion axles at a fraction of the cost

2. Equalizer

Equaflex

Equaflex

Equaflex suspension is popular with travelers. It rides quite nicely over railroad tracks as well as other potholes and bumps. EquaFlex’s material has only a limited effect on its load capacity.

MORryde

MORryde is by far the favored technique for shackle wet bolts. The stock shackle bushings on many trailers get worn out after a year or so, thus the MorRyde system is probably the best alternative.

Winner: Equaflex

3. Options

Equaflex

Equaflex gives customers the option of going with just the gadget. Alternatively, you may get the whole kit, which includes axles. These will assist you in installing the product on vehicles with compatibility issues.

MORryde

The MORryde has a variety of options from which to choose depending on your needs. The CRE3000 model, in particular, is quite similar to the Equa suspension flex’s mechanism. This has a rubber insert on the inside as well.

Winner: MORryde

Sale
MORryde CRE2-33 CRE3000 Suspension System, Tandem Axle - 33-Inch Wheel Base
  • Smoother towing than conventional leaf springs.Fit Type: Universal Fit
  • Provides 3" of suspension travel
  • Protects from damaging road shock

4. Shackle kit

Equaflex

A shackle kit may be a preferable option for most individuals because it simplifies the installation procedure. It also eliminates the need to manually check for support.

MORryde

You may also purchase MORryde kits. They use a high-performance suspension system to safeguard your wheel or travel trailer structure from road vibration. This kit provides up to 3 inches of suspension travel to alleviate frame stress and provide a more pleasant ride.

Winner: MORryde

5. Shock absorption

Equaflex

This assists it in absorbing the majority of the shock that your car experiences when it hits a bump. All of this will be eliminated with Equaflex, and the user should have an incredibly smooth drive.

MORryde

MORryde’s substance will relieve stress on your chassis frame while also assisting in the removal of most shocks. When it comes to installation, both items are pretty comparable.

Winner: Equaflex

Lippert Equa-Flex Rubberized Equalizer Tandem Axle Kit for Double-Eye Leaf Springs and Wide-Stance...
  • SMOOTHER RIDE - Dramatically reduces fore to aft trailer movement, otherwise known as chucking
  • ADDED PROTECTION - Helps eliminate trailer and cargo damage caused by road shock and vibration
  • EASY UPGRADE - Delivers a ride as smooth as torsion axles at a fraction of the cost

6. Shock absorption

Equaflex

This assists it in absorbing the majority of the shock that your car experiences when it hits a bump. All of this will be eliminated with Equaflex, and the user should have an incredibly smooth drive.

MORryde

MORryde’s substance will relieve stress on your chassis frame while also assisting in the removal of most shocks. When it comes to installation, both items are pretty comparable.

Winner: Equaflex

7. Weight limit

Equaflex

EquaFlex combines both concepts well. Trailers with tandem axles and double-eye leaf springs and a weight capacity from 4,000 pounds to 6,000 pounds will benefit from the installation of this kit. The center and top bolt holes are 9/16″ in diameter. Most Equaflex versions can only go up to 6000.

MORryde

The MORryde gadget can also support a total weight of 8000 pounds. The MORryde has been expertly tested and is rated for up to 7,000 lb axles. There are additional versions intended primarily for tandems or triple axle wheelbase variants.

Winner: MORryde

Sale
MORryde CRE2-33 CRE3000 Suspension System, Tandem Axle - 33-Inch Wheel Base
  • Smoother towing than conventional leaf springs.Fit Type: Universal Fit
  • Provides 3" of suspension travel
  • Protects from damaging road shock

8. Warranty

Equaflex

The equaflex also comes with a one-year limited warranty. If there is a problem with the EquaFlex equalizers’ Never Fail bushings, it is usually a warranty claim because they carry a lifetime warranty.

MORryde

The suspension system for MORryde products is also covered by a 2-year guarantee. If there is an issue with the gadget, you may make a claim and the firm will offer you a remedy or a replacement.

Winner: MORryde

9. Installation

Equaflex

Install the equaflex suspension so that the heads of the bolts on the equalizers face away from the trailer. The label on the equalizers used to be on only one side, which is why the instructions read the way they do.

MORryde

One thing to bear in mind is that the device must be properly installed because it may be rather harmful if not firmly fitted. Even though many current trailers and fifth wheels come standard with MORryde’s StepAbove stairs, they may be installed on practically any model.

Winner: Equaflex

Lippert Equa-Flex Rubberized Equalizer Tandem Axle Kit for Double-Eye Leaf Springs and Wide-Stance...
  • SMOOTHER RIDE - Dramatically reduces fore to aft trailer movement, otherwise known as chucking
  • ADDED PROTECTION - Helps eliminate trailer and cargo damage caused by road shock and vibration
  • EASY UPGRADE - Delivers a ride as smooth as torsion axles at a fraction of the cost

10. Travel experience

Equa flex

When towing your RV, the equa flex rubberized equalizer provides a smoother, more pleasant ride. This kit significantly minimizes fore-and-aft trailer movement, often known as chucking, and it aids in the elimination of trailer and cargo damage caused by road stress and vibration.

MORryde

Even on rough roads, the airless suspension system provides a more comfortable ride. It complements the existing leaf spring suspension system. You receive a smoother ride without the expense of airbags or air conditioning maintenance.

Winner: Equa flex

11. Height compatibility

Equaflex

The cushioned equalizers of equaflex stand 3-1/4 inches tall “which is seen in the photo below. If you have only two “If you use the current equalizers to raise the trailer somewhat, it will not be a direct 1:1 ratio in terms of the difference between the old and new.

MORryde

In terms of towing performance, the MORryde Independent Suspension is the finest option. This structure includes free wheel motion, suspension travel of up to 5 12 crawls, and a supported outline.

Winner: MORryde

Sale
MORryde CRE2-33 CRE3000 Suspension System, Tandem Axle - 33-Inch Wheel Base
  • Smoother towing than conventional leaf springs.Fit Type: Universal Fit
  • Provides 3" of suspension travel
  • Protects from damaging road shock

Which One Is The Better Option?

Equaflex is a well-known suspension framework upgrade for RVs and sports cars. EquaFlex helps you fight the two worlds. But packed with all its features, there are also many more to it which you can see below:

Advantages

  1. It is inexpensive.
  2. Allows for a significant height increase
  3. Equa flex adds additional safety by using a rubber material that absorbs shock readily.
  4. Padded adjusters supplant the cast balancers. 
  5. Solid bronze bushings come pre-introduced.

Disadvantages

  1. Some people may benefit less from increasing their height.
  2. “Never fail bushings” are no longer supported on newer models.

Basic Troubleshooting of MORryde

Owners must understand the fundamentals of troubleshooting. Proper tire pressure, according to tire manufacturer guidelines, implies filling tires based on individual wheel weights, rather than inflating to the maximum pressure listed on the tire. All these will be outlined and more in the table below:

Problem

Cause

Remedy

Excessive tire wear

Axle arrangement

  1. Ill-advised tire pressure
  2. Tires out of equilibrium
  3. Ill-advised brake change

Adjust axles

  1. Change pneumatic stress
  2. Balance tires
  3. Change brakes

Round ride

  1. Torn elastic spring
  2. The trailer isn’t level front to back
  1. Supplant the CRE3000 adjuster
  2. Change pin box level to even out the trailer

Excessive sway

  1. Inappropriate tire pressure
  2. Torn elastic spring
  3. Inappropriate hitch weight
  1. Change pneumatic stress
  2. Supplant CRE3000 balancer
  3. Travel trailers ought to have 10%-12%
  4. 20% – 25% hitch weight

Installation guide of MORryde CRE3000 tandem

MORryde cre3000 review have always been positive. They are one of the best suspensions in the market. If you want to install it, follow the steps mentioned below

Tools Required To Install MORryde CRE3000

You will need the following items to install the MORRyde cre3000:

Amazon Basics 3/8-Inch Drive Click Torque Wrench - 15-80 ft.-lb, 20.4-108.5 Nm
Amazon Basics 3/8-Inch Drive Click Torque Wrench - 15-80 ft.-lb, 20.4-108.5 Nm
Includes sturdy plastic case for storage and portability
CRAFTSMAN Deep Impact Socket, SAE, 1/2-Inch Drive, 11/16-Inch (CMMT16060)
CRAFTSMAN Deep Impact Socket, SAE, 1/2-Inch Drive, 11/16-Inch (CMMT16060)
CORROSION RESISTANT: Impact Socket have a black oxide finish; INCREASED TORQUE: 6-point impact socket comes with fastener
Sale
SUNEX TOOLS 993026 13/16' Fully Polished Stubby Combination Wrench
SUNEX TOOLS 993026 13/16" Fully Polished Stubby Combination Wrench
Fully polished drop-forged alloy steel; Compact design for maximum access in confined areas
Mr. Chain 91503-6 Black Stanchion, 2' link x 41' Overall Height, Pack of 6
Mr. Chain 91503-6 Black Stanchion, 2" link x 41" Overall Height, Pack of 6
Strong Visual Presence - Each stanchion post is 41 inches tall with a 14-inch hollow base.
GEARWRENCH 4 Pc. Flex Handle RATCHET SET, 84T - 81230A-07
GEARWRENCH 4 Pc. Flex Handle RATCHET SET, 84T - 81230A-07
The 84 tooth gear from GEARWRENCH offers a 4.3° swing arc for easy access; Bright, full polish chrome finish easily wipes clean and resists corrosion

Step-By-Step Solution to Installing MORryde CRE3000

  1. Remove all lug nuts. 
  2. Raise the device and support the frame with safety supports using suitably rated jacks. 
  3. Remove all wheels and use floor jacks to support the axles.
  4. The CRE3000 should be used in lieu of the standard equalizer. 
  5. Replace the shackle links and torque all nuts to 40 ft-lbs.
  6. In the wake of reinstalling the wheels in general, eliminate the jacks and supports from the edge and axles. 

Installation guide of MORryde CRE3000 Triple

With the MORryde CRE3000 Triple, you can enjoy a smooth towing experience by upgrading the suspension system on your fifth wheel or travel trailer. If you wish to install it, follow the steps below

Tools required MORryde CRE3000 Triple

You will require the following tools to install the MORryde CRE3000 Triple:

Amazon Basics 3/8-Inch Drive Click Torque Wrench - 15-80 ft.-lb, 20.4-108.5 Nm
Amazon Basics 3/8-Inch Drive Click Torque Wrench - 15-80 ft.-lb, 20.4-108.5 Nm
Includes sturdy plastic case for storage and portability
CRAFTSMAN Deep Impact Socket, SAE, 1/2-Inch Drive, 11/16-Inch (CMMT16060)
CRAFTSMAN Deep Impact Socket, SAE, 1/2-Inch Drive, 11/16-Inch (CMMT16060)
CORROSION RESISTANT: Impact Socket have a black oxide finish; INCREASED TORQUE: 6-point impact socket comes with fastener
Sale
SUNEX TOOLS 993026 13/16' Fully Polished Stubby Combination Wrench
SUNEX TOOLS 993026 13/16" Fully Polished Stubby Combination Wrench
Fully polished drop-forged alloy steel; Compact design for maximum access in confined areas
Mr. Chain 91503-6 Black Stanchion, 2' link x 41' Overall Height, Pack of 6
Mr. Chain 91503-6 Black Stanchion, 2" link x 41" Overall Height, Pack of 6
Strong Visual Presence - Each stanchion post is 41 inches tall with a 14-inch hollow base.
GEARWRENCH 4 Pc. Flex Handle RATCHET SET, 84T - 81230A-07
GEARWRENCH 4 Pc. Flex Handle RATCHET SET, 84T - 81230A-07
The 84 tooth gear from GEARWRENCH offers a 4.3° swing arc for easy access; Bright, full polish chrome finish easily wipes clean and resists corrosion

Step-By-Step Solution to Install MORryde CRE3000 Triple

  1. Release all fasteners. Utilizing fittingly appraised jacks, raise the unit and backing the casing with security stands. Support the axles with floor jacks and eliminate all wheels.
  2. On the curbside of the unit, eliminate the shackle joins from the front leaf spring, and eliminate the shoulder bolt from the middle leaf spring.
  3. Supplant the stock equalizer with the Standard CRE3000 triple. Supplant the shoulder bolt. Reinstall the shackle connections and force all nuts to 40 ft-lbs.
  4. Rehash Steps 2-6 for the contrary side of the unit.
  5. Reinstall all wheels, then, at that point, eliminate the jacks and supports from the edge and axles. Force all fasteners as per producer details.

Things to consider when Upgrading a Suspension

1. Anti-roll

Installing anti-roll bars or sway bars is one of the easiest upgrades to suspension. An anti-roll bar is essentially a lever connecting two opposite wheels.

2. Strut tower braces

The strut tower brace is another basic yet useful component for enhancing your automobile suspension. This bolt-on addition connects the front tower braces to disperse strong torsional force that affects suspension when cornering.

3. Coilovers

Why are coil-overs used to improve automotive suspension? Coil-overs are just shock absorbers encased in a coil spring. The coil-overs bring the vehicle down. This enhances grip and lowers body roll while also improving aerodynamics.

4. Wheels and Tires

When updating your automobile suspension, installing high-performance tires will undoubtedly make a world of difference when compared to conventional tires. Depending on what you want to do with your automobile, this might be the most expensive upgrade.

5. Material

Recognize that ultimate grip and handling might occasionally be at odds with comfort or compliance. There may be unintended effects if you replace all of your vehicle’s rubber bushings with considerably tougher polyurethane or even metal ones.

Frequently Asked Questions

1. How is equaflex installed?

Introduce the EquaFlex Equalizer into the middle casing holder. The EquaFlex Equalizer name ought to look out.

2. How might an axel mount to a unit?

Camber should be arranged in the UP position. To mount the axel on the trailer, the spring cut should be removed from the front and arranged on the front.

3. What are the support guidelines equaflex?

The maintenance guidelines are the basic rules and regulations of equaflex.

4. How are wheels estimated for in-toe arrangement?

Calculate the distance between the primary rail of the edge and the center track of the tire on each side of the vehicle.

5. How are axel wheels supplanted?

Lift the unit and remove the uu-bolts. Remove the axle beams and install the new beams.

Final Verdict

Taking all things into consideration, I could not choose both as my winner. I had to settle on one between Equa flex Vs MORryde. And I chose to go with Equaflex due to its lower price. Even though MORryde had all the features I needed, the price seemed overkill for me.

But for people looking for a bit more squeeze out of their money, the MORryde will be perfect. Packed with heavy specs, it is truly out of this world. But now that you have reached to this point of the article, I am sure you are doubt free and have finished choosing the right one already. Adiós for now!

Eric Weldon
Eric Weldon
Hey Everyone! Thank you so much for stopping by and checking out our blog! We are very happy and excited to have started this journey of blogging about adventuring in Our Trailer! Please stay awhile, comment or share anything you like or let us know what you don't 🙂